Network Software Ports Needed To Support Dlm Disaster Recovery Testing; Installation Information; Required Network Port For Disaster Recovery Testing; External Dependencies - Dell EMC DLm8500 Data Domain Physical Planning Manual

Network software ports needed to support DLm Disaster
Recovery Testing

Installation information

Table 2 Required Network Ports for DLm Operations (continued)
Port Port Type
Number
5432 TCP/UDP
To perform DLm Disaster Recovery testing on a mainframe and to allow the mainframe
to write data to the back-end storage, you must configure your firewall to allow traffic
on particular network ports that are different for each back-end storage system type.
The following table lists the special port for Disaster Recovery testing for the various
DLm models.
Table 3 Required Network Port for Disaster Recovery Testing
DLm Port Number
Model
DLm8500 9050
with VMAX
DLm8500 9060
with Data
Domain
DLm8500 2051
with Data
Domain
Discuss and obtain the following site profile information from the EMC Sales
Representative. The following table lists the external dependencies that need to be
considered for configuring DLm systems.
Table 4 External dependencies
Requirements
Mainframe software
Channel information

Network software ports needed to support DLm Disaster Recovery Testing

Protocol(s Traffic User Direction of
)
LDAP PostgreSQL
Database
Port Type Traffic
User
TCP DLMDRC/D
Lm disaster
recovery
TCP DLMAUT
TCP Replication
Specifications
Operating system and version number
l
JES2 or JES3
l
Channel type
l
Number of channels
l
Type of channels: FICON
l
Configuration and host connectivity
Notes
Traffic
Inbound/ N/A
Outbound
Direction Notes
of Traffic
Outbound DR to
maintain
Inbound/ DR to
Outbound maintain
Inbound/ Proprietary
Outbound protocol
15