Operation manual
11.2.3
G9SR-AD□-□ with door interlocking up to PLe with F3S-TGR-N__C
Settings G9SR-AD:
•
Manual Restart enabled
•
EDM enabled
•
Dynamic Input Test enabled
Dip switch settings:
Description:
Non-contact switch connected to T12 and T22
Restart pushbutton connected to T31
KM1 and KM2: Motor Contactors
Feedback loop (EDM) connected to T32
Remarks:
This setup can also be used with safety limit switches and key operated door switches.
For door and gate monitoring applications please consider the requirements from ISO
14119.
Wiring is using the dynamic test pulses.
Applicable up to PLe acc. EN ISO 13849-1 (electrical system).
Motor circuit (contacts of KM1 and KM2) not shown.
Page 66 of 79
1
2
3
OFF
ON
ON
4
5
6
OFF
OFF
OFF
G9SR
7
8
OFF
OFF