Derating Curve Of Relay Contact Current - Omron G9SR Series Operation Manual

Operation manual
Item
Power supply requirement
4.2

Derating curve of relay contact current

The temperature of the modules is influenced by Load Current [A] and the distance
[25 mm] between units.
Use the derating curve to determine the maximum allowed relay contact current for the
actual operating temperature of the unit. This applies to each single relay contact.
Note:
Page 12 of 79
Value
Double insulation acc. EN 60950
The graph is valid for an environment temperature of 21 °C and
with each contact driving the same current at the same time.
G9SR