Led Indicators - Supermicro X12SAE User Manual

2.10 LED Indicators

LAN1/LAN2 LEDs
LAN1 and LAN2 ports are located on the I/O back panel of the
motherboard. Each Ethernet LAN port has two LEDs. The yellow LED
indicates activity, while the other Link LED may be green, amber, or
off to indicate the speed of the connection. Refer to the tables below
for more information.
LAN2 Speed LED (Left)
LED State
LED Color Definition
Green 2500Mbps
Yellow 1000Mbps
Off 100/10Mbps
IPMI LAN LEDs
The IPMI LAN port is located next to the LAN1 on the I/O back panel. The left LED indicates
the speed of the connection, while the right LED indicates the status of activity. Refer to the
table below for more information. The IPMI LAN port is supported by X12SCA-F only.
AUDIO FP
BMC
JPL2
BMC_HB_LED
JPG1
JPAC1
COM1
USB0/1
B3
JWD1
JTPM1
JPME2
PCH
JF1
SP1
JBT1
JD1
JSTBY1
PCI-E_M.2-M1
I-SATA2 I-SATA0
JSD1 I-SATA3 I-SATA1
JL1
MAC CODE
MAC CODE
LAN1 Speed LED (Left)
LED State
LED Color
Yellow
Green
Off
IPMI LAN LEDs
LED State
Color Status
Link (left) Green: Solid
Amber: Solid
Activity (right) Amber: Blinking
LED4
UID
1 2
AUDIO
LAN2 LAN1 IPMI_LAN
USB8/9 USB6/7 USB2/3
USB3.2Gen2 USB3.2Gen2 USB3.2Gen1
CATERR_LED
PCI-E_M.2-M2
BIOS LICENSE
DIMMA1
X12SCA-F
DIMMA2
DIMMB1
REV:1.01
DIMMB2
DESIGNED IN USA
USB10
USB3.2 Gen2
USB4/5
USB3.2 Gen1
SYS_FAN2
IPMI CODE
BAR CODE
LAN1/LAN2 Activity LED (Right)
Color
Definition
Yellow
1000Mbps
100Mbps
10Mbps
Definition
100Mbps
1Gbps
Active
1. LAN1/2 LEDs
2. IPMI LAN LEDs
DP
HDMI
VGA
DVI
JPL1
CPU_FAN1
JPW2
CPU_FAN2
12V_PUMP_PWR1
JPI2C1
SYS_FAN1
JPW1
57
Chapter 2: Installation
Link Activity
LED LED
LED State
Status Definition
Flashing Active