Supermicro X12SAE User Manual page 84

Super X12SAE/X12SCA-F User's Manual
Device Settings - IO=3F8h; IRQ=4;
Change Settings
This feature configures the IRQ setting for Serial Port 1 (COM1). The options for Serial
Port is Auto, "IO=3F8h; IRQ=4", "IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12", "IO=2F8h;
IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12", and "IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12".
Network Configuration
MAC: XXXXXXXXXXXX-IPv4 Network Configuration
Configured
This feature indicates whether a network address configured successfully or not. The
default is Unchecked.
*If this feature is set to checked, the following features will become available for
configuration:
Enable DHCP
Use this feature to set the DHCP. The default is Unchecked.
*If this feature is set to Unchecked, the following features will become available
for configuration:
Local IP Address - Enter an IP address in dotted-decimal notation
Local NetMask - Enter a NetMask in dotted-decimal notation
Local Gateway - Enter a Gateway in dotted-decimal notation
Local DNS Servers - Enter a DNS Servers in dotted-decimal notation
Save Changes and Exit
Select this feature to save the changes you've made and return to the upper configura-
tion page.
84