Supermicro X12SAE User Manual page 94

Super X12SAE/X12SCA-F User's Manual
COM1 Redirection After BIOS POST
Use this feature to enable or disable legacy console redirection after BIOS POST. When
set to Bootloader, legacy console redirection is disabled before booting the OS. When
set to Always Enable, legacy console redirection remains enabled when booting the OS.
The options are Always Enable and Bootloader.
SOL
SOL Console Redirection
Check the box to enable console redirection support for a serial port specified by the user.
The options are Unchecked and Checked.
* If the feature above is set to Checked, the following features will become available
for configuration:
SOL Console Redirection Settings
SOL Console Redirection Settings
SOL Terminal Type
This feature allows the user to select the target terminal emulation type for Console
Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to add color
and function key support. Select ANSI to use the Extended ASCII Character Set. Select
VT-UTF8 to use UTF8 encoding to map Unicode characters into one or more bytes. The
options are VT100, VT100+, VT-UTF8, and ANSI.
SOL Bits Per Second
Use this feature to set the transmission speed for a serial port used in Console Redirec-
tion. Make sure that the same speed is used in the host computer and the client computer.
A lower transmission speed may be required for long and busy lines. The options are
9600, 19200, 38400, 57600, and 115200 (bits per second).
SOL Data Bits
Use this feature to set the data transmission size for Console Redirection. The options
are 7 and 8.
94