Led Indicators; Back Panel I/O Connectors - Supermicro H13SRA-TF Quick Reference Manual

C I
ontaCt nformatIon
• www.supermicro.com (Email: support@supermicro.com)
• Manuals: https://www.supermicro.com/support/manuals
• Drivers & Utilities: https://www.supermicro.com/wdl/driver/
• Safety: https://www.supermicro.com/about/policies/safety_information.cfm

LED Indicators

LED
LED1
LED3601, LED3602
LED7
LEDBMC
CPU and Memory Support
The H13SRA-TF/H13SRA-F motherboard supports an AMD Ryzen™ Threadripper™ PRO 7000 WX-Series and Ryzen Threadripper 7000
Series processor with a TDP of up to 350 W in an sTR5 socket. The memory support is up to 4 TB ECC RDIMM/3DS RDIMM memory with
speeds of up to 5200 MT/s (1DPC) or higher with overclocking support in four ECC DDR5 (288-pin) DIMM slots.
Populating these DIMM slots with a pair of memory modules of the same type and size will result in interleaved memory, which will improve
memory performance.
Notes: 1) For memory optimization, use only DIMM modules that have been validated by Supermicro. For the latest memory updates,
please refer to our website at https://www.supermicro.com/products/motherboard.
2) Always connect the power cord last, and always remove it before adding, removing, or changing any hardware components.
3) Memory addressing up to 1 TB/channel is subject to AMD Infrastructure Roadmap for sTR5 socket processors.
Memory Population Guidelines
• It is recommended to use DDR5 DIMM modules of the same size, type, and speed to improve
memory performance.
• Mixed DIMM speeds can be installed. However, all DIMMs will run at the speed of the slowest DIMM.
• The DDR5 DIMM module is NOT hot-swappable and be sure to disconnect power for a minimum
of 20 seconds before inserting or removing it.
• Removing a DDR5 DIMM module at a slant angle will cause module damages. It is strongly recom-
mended that you lift the module straight up out of the slot.
Recommended Memory Population Guide (1DPC)
DIMMG1
1 DIMM
2 DIMMs
4 DIMMs DDR5
Front Control Panel (JF1)
1 2
Power Button Ground
Reset Button Ground
3.3V Power Fail LED
UID LED OH/Fan Fail/PWR Fail LED
P3V3_STBY NIC2 Active LED
P3V3_STBY NIC1 Active LED
ID_UID/3.3V Stby HDD LED
3.3V FP PWR LED
Key Key
Ground
NMI
19 20
LED Indicators
Description
Unit Identifier (UID) LED
M.2 LEDs for M.2-C1 and M.2-C2
Onboard Power LED
BMC Heartbeat LED
DIMM Memory Installation
DIMME1 DIMMA1
DDR5
CPU
DDR5 DDR5
DDR5 DDR5

Back Panel I/O Connectors

1
2
3
4
5
6
7
DIMMC1
DDR5
Line In (Default) 8
Line Out (Default) 9
Mic In (Default) 10
COM1 Port 11
VGA Port 12
Dedicated BMC LAN Port 13
USB9: USB 3.2 Gen. 2x2 Port 14
1
4
2 5 6
3
Color/State
Blue On: Unit Identified
Blinking Green: Device Working
Solid Green: Power On
Blinking Green: BMC Normal
CPU
LAN1: RJ45 LAN Port
(1 GbE for H13SRA-F, 10 GbE for H13SRA-TF)
USB4: USB 3.2 Gen. 2 Port
USB5: USB 3.2 Gen. 2 Port
LAN2: RJ45 LAN Port
(1 GbE for H13SRA-F, 10 GbE for H13SRA-TF)
USB6: USB 3.2 Gen. 2 Port
USB7: USB 3.2 Gen. 2 Port
UID Switch / BMC Reset Button
8 11
7 9 12 14
10 13