Supermicro X12SAE User Manual page 43

Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system. Refer to the table below for pin definitions.
Power Button
The Power Button connection is located on pins1 and 2 of JF1. Momentarily contacting both
pins will power on/off the system. This button can also be configured to function as a suspend
button (refer to the section of
mode, press the button for at least four seconds. Refer to the table below for pin definitions.
20 19
Ground
NMI
X X
Vcc
Power LED
Vcc (X12SAE)
HDD LED
UID SW (X12SCA-F)
NIC1 LED Vcc
Vcc
NIC2 LED
OH/Fan Fail LED
Vcc
Power Fail LED
Vcc
#3~4
Ground
Ground #1~2
2 1
Reset Button
Pin Definitions (JF1)
Pin# Definition
3 Reset
4 Ground
Power Configuration). To turn off the power in the suspend
Power Button
Pin Definitions (JF1)
Pin# Definition
1 Signal
2 Ground
1
Reset Button
2
Power Button
43
Chapter 2: Installation
1. Reset Button
2. Power Button