Barcode Input - CipherLab 8000 Series User Manual

For example, 4 is selected for decimal places, however, there are only 2 decimal places
in the input number, say "8.12". To follow this rule, the system will save the input data
as "8.1200". If the input number is "8.12345", it will be saved as "8.1234".

1.14.2 BARCODE INPUT

READ PARTIAL BARCODE
By default, it will return the whole barcode that has been decoded. When the check box
is selected, it will return partial barcode according to the settings of the start position and
maximum length.
Below are some examples.
Start position
2
2
CHECK LEADING CODE
The leading code refers to the digit in the start position of a barcode.
Select the check box to verify the barcode input. When the leading code is not matching,
the barcode will be rejected.
Below are some examples.
Leading code
9
2
Read partial code + Check leading code:
Start position Max. length
2 7
2 7
CHECK DIGIT VERIFICATION
The check digit refers to the digit in the end of a barcode, as a one-digit derived
checksum digit. Select the check box to verify the barcode input. You may apply different
modulus 10 or 11 check digit as provided in the drop-down menu. When the check digit
is not matching, the barcode will be rejected.
Max. length
10
3
Barcode scanned
9876543210
9876543210
Leading Code
8
9
Barcode scanned
9876543210
9876543210
Transaction record
9876543210
(Error: code not matching)
Barcode scanned
9876543210
987654321
Chapter 1 Form
Transaction record
876543210
876
Transaction record
8765432
(Error)
31