Symbology Settings Table - CipherLab 8000 Series User Manual

FORGE Batch Application Generator
Auto Power Off Mode Press the scan trigger to start with scanning.
Read Redundancy
None No redundancy means one successful decoding will make the reading valid
and induce the "READER Event".
One time, Two times, The higher the reading security is (that is, the more redundancy the user
or Three times selects), the slower the reading speed gets.

SYMBOLOGY SETTINGS TABLE

CCD/Laser Description
Codabar
Transmit Start/Stop Decide whether to include the start/stop characters in the
Characters data being transmitted.
If "Transmit Start/Stop Characters" is desired, select one
set:
Code 128
GS1-128
Transmit Code ID (for Decide whether to include Code ID ("]C1") will be included
GS1-128) in the data being transmitted.
Field Separator Decide whether to replace the field separator. If the
Replacement barcode contains Field Separator "0x1D", it will be
changed to the desired Field Separator. For example, type
the desired character ";" (semicolon) as the new field
separator. Then if the barcode contains Field Separator
"0x1D", it will be changed to ";".
Industrial 25 (= Discrete 25)
Start/Stop Selection This decides the readability of all 2 of 5 symbology
variants. For example, flight tickets actually use an
Industrial 2 of 5 barcode but with Interleaved 2 of 5
start/stop pattern. In order to read this barcode, the
start/stop pattern selection parameter of Industrial 2 of 5
should set to "Interleaved 25".
Verify Check Digit Decide whether to verify the check digit. If the check digit
is incorrect, the barcode will not be accepted.
Transmit Check Digit Decide whether to include the check digit in the data being
transmitted.
66
User Guide
The scanning won't stop until the preset timeout expires, and, the
preset timeout period re-counts after each successful decoding.
If "Three Times" is selected, it will take a total of four consecutive
successful decodings of the same barcode to make the reading valid.
abcd / abcd
abcd / tn*e
ABCD / ABCD
ABCD / TN*E
None
Default
Enable
No
Enable
Enable
No
No
Enable
Industrial 25
No
Yes