Dbf File Location; Lookup Data; Only Read Data Once; Lookup Data Can Be Uploaded - CipherLab 8000 Series User Manual

Refer to the settings of section

3.2.4 DBF FILE LOCATION

You may specify the location to store the DBF files. The options are as follows:
SRAM
SD Card

3.3 LOOKUP DATA

3.3.1 ONLY READ DATA ONCE

Select the check box to compare data of an input field and the key field of the lookup file
it refers to.
If this function is enabled, Insert to lookup file will be automatically set in section
Action When the Input Data Has No
Message & Insert.
When the data is found matching (i.e. data already exist), this record will be rejected.
When the data is found no matching (i.e. new data), it will be inserted to the lookup
file.

3.3.2 LOOKUP DATA CAN BE UPLOADED

This is the default setting. The lookup data can be uploaded from the mobile computer to
your computer. On the mobile computer, select [2. Upload Data] after you have
completed the data collection task and establish a proper connection with the server.
Refer to section 1.2.3 Record.

3.4 ACTION WHEN THE INPUT DATA HAS NO MATCH

Choose the appropriate action to take when the input data does not match that of the
"key field".
3.4.1 CONTINUE
The program will allow data input to proceed without showing any message.
Data can only be saved in a data file if you have selected "Save", "Save & update",
"Save & output record", "Save & output screen" or "Save & remove" in section
Record.
3.8 Action When the Format of Record Is
Match, and you may change it to Show Warning
Chapter 3 Lookup
Wrong.
3.4
1.2.3
39