Keypad & Lcd; Notification - CipherLab 8000 Series User Manual

FORGE Batch Application Generator User Guide
If you don't want to delete any data file(s) or lookup file(s), please select "Always keep".
The data file(s) and lookup file(s) will always be kept in the mobile computer.
ENTRY OPTIONS
You may specify whether or not to display more information, either the record count
(Show count) or the record preview (Show record), before proceeding to the next entry.
By default, the record count will be displayed on the mobile computer screen for 600
milliseconds as soon as an entry is completed. Refer to 1.8.15 Counter.
When selecting "Show count" or "Show record", you will need to specify how long it will
be displayed on the screen. Time-out is specified in the range of 1~99, in units of 100
milliseconds.
5.1.2 KEYPAD & LCD
KEY CLICK
By default, "Tone 2" is used for the key click. You may select a desired tone or mute it.
BACKLIGHT
By default, the backlight for the LCD and the keypad of the mobile computer is turned
off.
When the backlight is turned on, you may specify a period of idle time so that it can be
automatically turned off. Such time-out is specified in the range of 1~9, in units of 10
seconds. The default time-out is 20 seconds.

5.1.3 NOTIFICATION

WARNING BEEP
You may specify whether or not to have a warning beep when a specific event takes
place. By default, it will produce two beeps to warn you of a specific event.
GOOD READ BEEP
You may specify whether or not to have a beep when decoding of a barcode is done
successfully. By default, it will produce one beep to inform you of a successful reading.
VIBRATOR DURATION
This is available in 8300/8400/8500 program only. You may specify whether or not to
turn on the vibrator to warn you of a specific event. By default, the vibrator is turned off.
You may turn it on for a preset period of time.
46