Operating The Unit; Power On And Off; Status Lights - Digital Check QUANTUM DS Series Installation And Operation Manual

Section 2

Operating the unit

Power On and Off

1. Turn the unit ON or OFF using the switch on the right of the unit.
a. Press "|" on the power switch to turn the unit ON.
b. Press "O" on the power switch to turn the unit OFF.
2. The top status light on the unit should be solid green and the middle status light
should blink lighter green. Refer to Section 5 if a problem occurs.

Status Lights

Three lights on the top of the unit indicate the status of the unit and the software
application that runs on the host PC. You should consult your application documentation
for information on the meaning of the bottom light, the application status light. When lit,
this light is always yellow (solid or blinking).
ON
OFF
Power
Ready
Application
2-1
82275345-003