Inserting Documents; Processing Documents (Document Flow) - Digital Check QUANTUM DS Series Installation And Operation Manual

Operating the unit
On the unit, the check bottom and leading edges of the stack of items must
align for satisfactory document feeding. Alignment of documents is very
important, especially when feeding small documents.

Inserting Documents


Insert items one at a time or in batches that fit easily in the feeder. The feeder
has a capacity of up to 300 items, depending on thickness and condition.

Wait for two green status lights.

Slide documents forward to the end of the feeder bay - printed sides face the
side of the unit, not the feeder flag
If feeding more than one item, do not slide or push items into the unit past the
end of the feeder bay. Refer to the graphic printed on the cover to show the
insertion point.

Processing Documents (Document Flow)

1. To initiate document processing, use either your application software user
interface, or press and release the Start/Stop button.
Note: Start/Stop Button functions are dependent on your application. Refer to
your application instructions.
Caution
2-7
82275345-003