Setting Up The Unit; Select A Place For The Unit - Digital Check QUANTUM DS Series Installation And Operation Manual

Section 1

Setting up the Unit

Select a Place for the Unit


Indoor only.

Flat, stable surface – minimum dimensions

QDS20012-SYS 49.3 inches (1252 mm) wide x 13.5 inches (343 mm) deep

Quantum DS weight

QDS20012-SYS weighs 59.8 pounds (27.2 kg)

Clearance

At front, to:

Turn the unit on.

Load and remove documents.

Above, to remove covers and access the track.

Between the sides of the unit and a monitor (if the unit is located next to a
monitor) to reduce interference with the magnetic ink character recognition
(MICR) reader inside the unit.

At rear, to connect the power cord (from the power supply), the USB
interface cable, and protect those connections.

Near PC or network connection

Near an AC power outlet, 100-240 Volts AC, 50/60 Hz.

Quantum DS has auto-ranging power input and no voltage or frequency
settings are required.

Power consumption = 330 Watts

Adequate ventilation

Away from water/moisture/high humidity, high heat/direct sunlight, dust.

Operating temperature: 15 to 40° C (59 to 104° F)

Storage temperature: -20 to 60° C (-4 to 140° F)

Shipping temperature: -40 to 65° C (-40 to 149° F)

Storage humidity: 5 to 95 % (non-condensing)

Operating humidity: 20 to 85 % (non-condensing)
1-1
82275345-003