AVT MAGIC Hardware & Software Manual page 49

W i n d o w s P C S o f t w a r e
Press the Start button to begin recording.
By pressing the Stop button recording is ended.
If the recording is acceptable it can be saved with the Save button.
ATTENTION Stored Hold Signal
Please note that while making an update of the firmware, the Hold signal is
erased from the system.
!
After every update the Hold signal must be recorded again.
Play Signal
At any time, the recorded Hold signal can be listened to before it is saved by
pressing Save.
With the Start button, the signal is present on all audio outputs.
The Stop button stops the replay.
P A GE 4 9