AVT MAGIC Hardware & Software Manual page 33

W i n d o w s P C S o f t w a r e
In some cases in a PABX, the old 1TR6 German national protocol can be
found.
Number of max. Incoming Calls
The MAGIC ISDN Telephone Hybrid has a maximum of four B channels that
can be called simultaneously. This equipment permits a telephone conference
with four participants.
When a single S line is connected, enter 2 here. If the second S line is also
0 0
connected, enter 4. To prevent more than one caller dialling in simultaneously
a 1 must be entered.
NOTE If the individual mode is set, a maximum of 3 callers can dial in simulta-
neously.
Auto Answer Call
If there is an incoming call, the system can accept the call automatically. For
this, set the appropriate check mark.
To prevent calls being auto answered do not set the check mark.
In the case of an incoming call, a relevant message appears on the PC.
Incoming Call Signalling (Relay 1 Behaviour)
The system has three relays one of which is used for external call signalling
(Relay 1, see CHAPTER A2.5).
The combination field permits the following settings:
– always open: The relay is always open.
– always closed: The relay is always closed.
– System controlled: If there is an incoming call on any channel the relay is
closed.
Enable System Buzzer
Incorrect operations or cautions can be signalled in the system by a buzzer. To
turn on the warning signal, set the appropriate check mark.
P A GE 3 3