Technical Specifications - Siemens CM 1542-1 Operating Instructions Manual

Technical specifications

Note the information in the System description of SIMATIC S7-1500 (Page 49).
In addition to the information in the system description, the following technical specifications
apply to the module.
Table 6- 1
Technical specifications
Article number
Attachment to Industrial Ethernet
Number
Design
Properties
Transmission speed
Aging time
Special features of the ports X1 P1
and X1 P2
Electrical data
Power supply
via S7-1500 backplane bus
Current consumption
From backplane bus
Effective power loss
Insulation tested with
Permitted ambient conditions
Ambient temperature
•
•
•
•
Relative humidity
•
Contaminant concentration
Design, dimensions and weight
Module format
CM 1542-1
Operating Instructions, 07/2019, C79000-G8976-C355-04
Technical specifications of the CM 1542-1
During operation with the rack
installed horizontally
During operation with the rack
installed vertically
During storage
During transportation
During operation
6GK7 542-1AX00-0XE0
1
PROFINET interface with 2port switch, 2 x RJ-45 jack
100BASE-TX, IEEE 802.3-2005, half duplex/full duplex, auto-
crossover, autonegotiation, galvanically isolated
10 / 100 Mbps
5 minutes
Integration in ring topology / MRP possible
15 V
220 mA maximum
3.3 W
707 VDC (type test)
0 ℃ to +60 ℃
•
0 ℃ to +40 ℃
•
-40 ℃ to +70 ℃
•
-40 ℃ to +70 ℃
•
≤ 95% at 25 °C, no condensation
•
Acc. to ISA-S71.04 severity level G1, G2, G3
Compact module S7-1500, single width
6
41