Technical Specifications - Siemens SIMATIC NET S7-300-PROFIBUS CP 342-5 Equipment Manual

Table of Contents

Advertisement

Technical specifications

Table 6- 1
CP 342-5
Technical specifications
Transmission speeds supported
Interfaces
Connection to PROFIBUS
Maximum current consumption on the PROFIBUS interface
when connecting network components
Rated voltage
Current consumption
from 24 V
from S7-300 / C7-300 backplane bus
Cable cross section for 24 V
Power dissipation
Permissible ambient temperature
With horizontal installation of the rack
With vertical installation of the rack
Transport/storage temperature
Max. relative humidity.
Operating altitude
Dimensions W x H x D (mm)
Weight
Over and above this, all the information relating to the following topics in /2/ (Page 54) and in
the section "General technical specifications" applies to the CP:
• Electromagnetic compatibility
• Transportation/storage conditions
• Mechanical and climatic environmental conditions
• Information on insulation checks, protection class and degree of protection
CP 342-5
Equipment Manual, 01/2023, C79000-G8976-C146-11
Value
9.6 kbps, 19.2 kbps, 45.45 kbps, 93.75 kbps, 187.5 kbps,
500 kbps, 1.5 Mbps, 3 Mbps, 6 Mbps, 12 Mbps
9-pin D-sub female connector
100 mA at 5V
24 V DC
120 mA typical / 230 mA max.
40 mA typical
0.25...2.5 mm
2
5 W
0...60 °C
0...40 °C
-40 °C through +70 °C
95% at +25 °C
Up to 2000 m above sea level
40 x 125 x 120
Approx. 300 g
6
45

Advertisement

Table of Contents
loading

Table of Contents