Technical Specifications - Siemens CP 443-5 Basic Manual

Technical Specifications

7
Technical Specifications
General Technical Data
Table 7-1
Technical Specifications
Supported Transmission Rates
Interfaces
Attachment to PROFIBUS
Maximum current consumption on the PROFIBUS
interface with network components attached (for
example, optical network components)
Power supply
Current consumption
– from S7-400 backplane bus
Power loss
Permitted ambient conditions
S
Operating temperature
S
Transportation/storage temperature
S
Relative humidity max.
S
Altitude
Design
Dimensions W x H x D (mm)
Weight
All the information in /1/ in the Section "General Technical Specifications" regarding
the following topics also applies to the CP 443-5 Basic
S Electromagnetic compatibility
S Transportation and storage conditions
S Mechanical and climatic ambient conditions
S Insulation tests, class of protection and degree of protection
B3–22
www.gkbpx.com
9.6 Kbps, 19.2 Kbps, 45.45 Kbps
93.75 Kbps, 187.5 Kbps, 500 Kbps
1.5 Mbps, 3 Mbps, 6 Mbps, 12 Mbps
9-pin sub-D female connector
100 mA at 5V
5 V DC
1.2 A typical at 5V
6.5 W
0 °C to +60 °C
–40 °C to +70 °C
95% at +25 °C
up to 1500 m above sea level
25 x 292 x 200
approx. 800 g
CP 443-5 Basic for PROFIBUS / Manual Part B3 –
Value
Release 11/2002
C79000-G8976-C161-03
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/