Turning On - Brainlab VectorVision System User's Manual

VECTORVISION SKY NAVIGATION STATION
5.5.2

Turning On

How to Turn On
Steps
Waiting Period
Abnormal Impacts
System User Guide Rev. 1.6 VectorVision
1. Ensure that all cables have been connected.
2. Open front door of 19" rack.
3. Turn main switch clockwise to "I" position.
4. Press UPS power on button.
5. Close front door of 19" rack.
6. Wait for system to boot.
NOTE: Once operating system has been initialized, the startup screen is opens.
Follow instructions given in the Software User Guide.
7.
If system has been turned off, wait at least 15 seconds before turning it on again. Oth-
erwise, high input current may trip the circuit breaker.
Do not use the system after an abnormal impact, such as an earthquake or explosion.
Because of the possibility of fundamental structural damage to the building, a new
structural evaluation must be performed.
71