Wincc Flexible Configuration; Hardware Configuration - Siemens SIMATIC Mobile Panel 277 IWLAN Application Description

5 Configuration Process

5.3 WinCC flexible configuration

5.3 WinCC flexible configuration
As operator panel the following devices are used:

Mobile Panel 277F IWLAN V2

Mobile Panel 277F IWLAN V2 (RFID)
The description below relates to the
"Mobile Panel 277F IWLAN V2".
The configuration for the "RFID" is performed in the same way.
5.3.1

Hardware configuration:

Please look at chapter 4.3 "Configuring the mobile panel" in the "Configuration and
Use of the Mobile Panel 277F IWLAN V2 Expansion by the "Roaming
Functionality" application description (Link).
This is where you can find a detailed description of all necessary settings for the
hardware configuration and the WLAN configuration.
5.3.2 WinCC flexible configuration
Below, the individual configuration steps are described.
Only the expansions relating to the "standard configuration" is dealt with.
Variables used
For the variables used, a separate folder was created.
For each access point a variable is used.
Table 5-12
No.
1. Variables:
Panel_01_At_AccessPoi_01
Panel_01_At_AccessPoi_02
General:
Acquisition mode:
Acquisition cycle:
Note:
a longer time for the acquisition cycle can also
be selected.
52
Action
Cyclic on use
100ms
Figure
Evaluating An Access Point Clients List
V1.0, Entry ID: 48946495