Wincc Flexible Configuration - Siemens SIMATIC Mobile Panel 277 IWLAN Application Description

2 Automation Solution
2.4 Overview and description of the user interface
2.4.2

WinCC flexible configuration

A Mobile Panel 277F IWLAN V2 and a
Mobile Panel 277F IWLAN V2 (RFID) was used for the application. The
configuration is based on the "standard configuration" for the mobile panel.
Both operator panels have the same structure.
"Screen_01" screen
The project consists of one screen
Figure 2-4
The following objects are located in the permanent window

Battery status

WLAN quality

and a text field
There are two graphics within the screen. The graphic shows with what access
point the mobile panel is connected. In addition, a text is displayed that shows
when the mobile panel is connected with an access point.
In the bottom part of the screen there are two buttons through which you can
switch the interface language and with which you can stop the runtime of the
mobile panel.
16
Evaluating An Access Point Clients List
V1.0, Entry ID: 48946495