5 Configuration Process
5.2 STEP 7 configuration
FC10, HMI_Program
Table 5-10
No.
2.
FC10, HMI_Program::
The FC10 is used to exchange data between
the mobile panel and the control program.
Using the FC15 or FC16 it is evaluated with
which access point a mobile panel is
connected.
The evaluated signals from these FCs are
transferred to the mobile panels using the
FC10.
Pay attention to the right assignment of the evaluated signals so the mobile
Note
panel is assigned the "right" access point.
44
Updates
Screens
Evaluating An Access Point Clients List
V1.0, Entry ID: 48946495