Automation Task; Introduction; Overview Of The Automation Task - Siemens SIMATIC Mobile Panel 277 IWLAN Application Description

1 Automation Task

1.1 Introduction

1 Automation Task
1.1 Introduction
The application is especially tailored for the mobile panel 277F IWLAN. However,
the functionality can also be used for the Mobile Panel 277 IWLAN or for devices
that are displayed through the clients list of an access point.
The application is based on the "Configuration and Use of the Mobile Panel 277F
IWLAN" application description (link). This is where the individual configuration
steps for creating a Mobile Panel 277F IWLAN project have already been
described.
The aim of this application is to read the clients list from an access point, to detect
with what access point the mobile panel is connected.

Whenever the mobile panel is mentioned in this document it relates to the Mobile
Notes
Panel 277F IWLAN V2.

Whenever the standard configuration for the mobile panel is discussed, it always
relates to the configuration from the
"Configuration and Use of the Mobile Panel 277F IWLAN" which you can download
under the following entry ID
1.2

Overview of the automation task

The figure below provides an overview of the automation task.
The figure shows a part of the plant with various stations. Each station is assigned
an access point. The individual stations can be operated and monitored through
several Mobile Panel 277F IWLAN.
Figure 1-1
Mobile Panel 277F IWLAN
Evaluating An Access Point Clients List
V1.0, Entry ID: 48946495
25702331
Reception area
Access Point 1"
Reception area
Access Point 2"
.
Reception area
Access Point 3"
7