Table of Contents
Advertisement
5 Configuration Process
5.3 WinCC flexible configuration
Graphics list
For the visual output of the results a graphics list is used for each access point.
The screens show with what access point the mobile panel is connected.
Table 5-13
No.
1.
AccessPoint_01:
A "symbolic graphic" serves as graphic of
"Scalance W788-2RR".
Value "0":
graphic with gray background.
(mobile panel not connected)
Value "1":
graphic with green background.
(mobile panel connected)
2.
AccessPoint_02:
The configuration is the same as the previous
graphics list.
Configured screen
For each mobile panel a screen each was configured.
Below, the functions configured in the screen are discussed.
Table 5-14
No.
1.
Graphic I/O field:
The previously described "AccessPoint_01"
graphics list is used as graphics list.
The "Panel_01_At_AccessPoi_01" variable is
used as process variables.
Depending on the state of the "0/1" variable,
the respective graphic is shown.
Note:
for the second graphic I/O field the same
graphics list is used.
The "Panel_01_At_AccessPoi_02" variable is
used as process variable.
Evaluating An Access Point Clients List
V1.0, Entry ID: 48946495
Action
Action
Screens
Screens
53
Advertisement
Table of Contents
