Siemens SIMATIC Mobile Panel 277 IWLAN Application Description page 23

Evaluate through which access point the mobile panel communicates, evaluating an access point clients list
Table of Contents

Advertisement

4 Functional Mechanisms of this Application
4.1 FB3 "GetRequest" functionality
Status messages of the FB3
The status messages below are status messages that have been created
especially by the block.
Table 4-2
State
No.
1.
0x0000
2.
0x81A3
3.
0x81A4
4.
0x81A5
5.
0x81A6
6.
0x81A7
7.
0x81A9
8.
0x81AA
9.
0x81AB
10.
0x81AD
Evaluating An Access Point Clients List
V1.0, Entry ID: 48946495
Description
Job completed without error
The received message frame is no SNMP response.
The received message frame is no SNMP message.
The ObjectID indicated does not exist in the "MIB library" (data
block, DB20 or DB21).
There is no reply to the SNMP order which has been sent for the
third time within 9 seconds.
Error during internal copying with the SFC20 "BLKMOV".
The SNMP variable was reported as "bad value".
The received SNMP PDU is too large (> 240 bytes)
The OID indicated does not exist in the agent.
The block was called with Enable=0.
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic mobile panel 277f iwlan

Table of Contents