HTV`.HC
Z|ϼ
1.2
Other symbols in this documentation
Note
General information is identified by the symbol shown
on the left.
f Read these texts carefully.
Z
ù
B¼| ê Ö
Material losses
(appliance, consequential, environment)
Appliance disposal
f This symbol indicates that you have to do something. The ac-
tion you need to take is described step by step.
1.3
Units of measurement
Note
All measurements are given in mm unless stated oth-
erwise.
ê¼¼ùé¼ù
2.
Safety
2.1
Intended use
The appliance is specifically designed for heating DHW with heat
pumps.
Any other use beyond that described shall be deemed inappropri-
ate. Observation of these instructions is also part of the correct
use of this appliance. Any modifications or conversions to the
appliance void all warranty rights.
2.2
Safety instructions
WARNING Burns
There is a risk of scalding at outlet temperatures in ex-
cess of 43 °C.
WARNING Injury
!
Where children or persons with limited physical, sensory
or mental abilities are allowed to control this appliance,
ensure that this will only happen under supervision or
after appropriate instruction by a person responsible
for their safety.
Children should be supervised to ensure that they never
play with the appliance!
Note
The appliance is under pressure.
During the heating process, expansion water will drip
from the safety valve. If water continues to drip when
heating is completed, please inform your heating con-
tractor.
2.3
Prüfzeichen
See type plate on the appliance.
3.
Appliance description
The heat from the heat pump's heating water is transferred to the
DHW by smooth-tube indirect coil.
The internal steel cylinder is coated in "anticor
is equipped with a thermometer and a signal anode. The anode
with consumption indicator protects the internal cylinder from
corrosion.
SBB 401 WP SOL | SBB 501 WP SOL
These appliances are also equipped with a second indirect coil for
DHW heating with solar energy.
®
" enamel and
Z
éÑ
qT ZH<
Ñ