Download
Share
Print this page
STIEBEL ELTRON SBB 300 plus Operation & Installation
  1. Manuals
  2. Brands
  3. STIEBEL ELTRON Manuals
  4. Water Heater
  5. SBB 300 PLUS
  6. Operation & installation
STIEBEL ELTRON SBB 300 plus Operation & Installation

STIEBEL ELTRON SBB 300 plus Operation & Installation

Stiebel eltron hot water heaters operation & installation
Hide thumbs Also See for SBB 300 plus:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual See also: Operating and Installation Instruction
SBB 300 plus, SBB 400 plus, SBB 600 plus
Operation & Installation
Index
Instruction Manual
1
Operation and Service
1.1 Start-Up
2
Maintenance and Cleaning
2.1 Membrane Safety Valve
2.2 Decalcification
2.3 Exchange of the Safety Anode
3
Failures – Cause – Correction
4
Technical Specifications
4.1 Technical Data
4.2 Dimensions
Installation Instructions
5
General
5.1 Description
5.2 Delivery Form
5.3 Regulations and standards
5.4 Set-up and operation
6
Set-up and installation
6.1 Set-up
6.2 Connection
6.3 Heater Installation
6.4 Hot water Installation
6.5 Hot Water Temperature Probe
6.6 Solar Temperature Probe
6.7 Connection to the Solar Unit
6.8 Signal Anode
7
Tips for the User

Advertisement

loading
Need help?

Need help?

Do you have a question about the SBB 300 plus and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for STIEBEL ELTRON SBB 300 plus

Summary of Contents for STIEBEL ELTRON SBB 300 plus

  • Page 1 SBB 300 plus, SBB 400 plus, SBB 600 plus Operation & Installation Index Instruction Manual Operation and Service 1.1 Start-Up Maintenance and Cleaning 2.1 Membrane Safety Valve 2.2 Decalcification 2.3 Exchange of the Safety Anode Failures – Cause – Correction Technical Specifications 4.1 Technical Data...
  • Page 2 Important Tip Stiebel Eltron hot water heaters should only be installed or serviced by licensed installers. These are not do-it-yourself appliances. Please hand this Operation and Installation Manual and hand over to the home or building owner when the installation is complete.

  • Page 3: Technical Specifications

    13 Heater return 14 Upper heat exchanger 15 Heater inlet 16 Warm water outlet Diag. 1. 4.1 Technical Data Type SBB 300 plus SBB 400 plus SBB 600 plus Contents Storage capacity Gal / ltr 80.6 / 305 108.6 / 411 162.9 / 617...
  • Page 4 Dimensions Diag. 2. 4.2 Dimensions Type SBB 300 plus SBB 400 plus SBB 600 plus Height of unit w/insulation in./mm 66.1/1679 72.7/1848 68.3/1735 Height of unit without insulation in./mm 63.3/1609 70.1/1781 65.7/1670 Height of well for temp. sensor in./mm 46.4/1179 48.7/1238...
  • Page 5 The illustration on page 5 is referenced for explanation of the following text. 5.1 Brief Description of the Appliance 5.1.1 Application The Stiebel Eltron Vertical Solar Storage tank SBB … K SOL is, in combination with Stiebel Eltron’s Solar Collector is an economical hot water generator. 5.1.2 Connectors All connectors (cold and hot water connectors) are readily accessible and allow for easy installation.

  • Page 6: Setup And Installation

    6. Set-up and Installation 6.1 Set-up Inspect the packaging for damage and remove packaging preferable only at the installation site. For the selection of the installation site, the tare weight of the storage unit (unit and insulator) including the fill-water weight must be considered.
  • Page 7 Installation Diagram Solar storage tank SBB plus 16 overflow valve 17 heater unit 18 hot water processor 19 hot water heater 20 circulation pipe (only if needed) 21 membrane safety valve 22 shut-off valve 23 Manometer connector socket 24 check valve 25 pressure reducer 26 shut-off valve 27 cold water pipe...
  • Page 8 Diag. 5 6.5 Hot water temperature probe 6.5.1 The hot water temperature probe is to be installed into the immersions sleeve (Pos. 3 Diag.1) of the hot water storage tank. Then the connector pipe for heater regulation has to be installed and attached to the clamps of the low voltage plug as described in separate operation and installation instructions for the regulator.
  • Page 9 Should the part(s) prove to be defective under normal use during this period, Stiebel Eltron, Inc. will be responsible for replacement of the defective part(s) only. Stiebel Eltron, Inc. will not be liable for any costs of transportation, removal, reinstallation, or any other labor or freight charges that may arise in connection with a warranty claim or any incidental or consequential expenses.