Introduction; Signs Used In This Guide; Standards Compliance - CS-Lab SimDrive M4-H075K User Manual

1. Introduction

1.1 Signs used in this guide

__________________________________________________________________________________
Potential danger and/or possible injury risk
__________________________________________________________________________________
Useful information, tips
__________________________________________________________________________________
Warning, failure to comply with these warnings may lead to inappropriate functioning or
damage of the device
__________________________________________________________________________________

1.2 Standards compliance

simDrive™ servo drives were designed and made in accordance with the national and international
standards for industrial control systems based on electronic components:
EN 61800-5-1
EN 61800-3
EN 61000-6-2
EN 61000-6-4
EN 61000-3-2
EN 61000-3-3
The product was made in lead-free technology, RoHS compliant.
The simDrive™ servo drive is a high-voltage device that can be hazardous to your health and life
Before you start any installation turn off the power of the device and wait min. 10 minutes – it is
the time needed to discharge a capacitor.
4
Adjustable speed electrical power drive systems - Safety
requirements - Electrical, thermal and energy
Adjustable speed electrical power drives systems. EMC
requirements and specific test methods
Electromagnetic compatibility (EMC). Generic standards –
Immunity for industrial environments
Electromagnetic compatibility (EMC). Generic standards -
Emission standard for industrial environments
Electromagnetic compatibility (EMC). Limits for harmonic
current emissions
Electromagnetic compatibility (EMC). Limitation of voltage
changes, voltage fluctuations and flicker in public low-
voltage supply systems,
simDrive™ - AC Servo Drive User Guide