1
Using InfiniiMax III Series Probes
6
9
14
16
17
18
24
27
This chapter contains documentation on using the InfiniiMax III probing
system.
The InfiniiMax III probing system offers you the highest performance
available for measuring differential and single-ended signals, with flexible
connectivity solutions for today's high-density ICs and circuit boards. Four
different InfiniiMax III probe amplifiers ranging from 16 GHz to 30 GHz are
available for matching your probing solution to your performance and
budget requirements. A proprietary 200 GHz fT InP (indium phosphide) IC
process with backside ground vias and novel thick film technology is
utilized to accommodate your highest performance needs.
The family diagram for the InfiniiMax III probing system is shown in
"InfiniiMax III and III+ Probing System Family Diagram"
on page 14. This
system is designed to give you the maximum flexibility in matching your
probe to your setup. The following pages will discuss each of the
adapters, probe amplifiers, and probe heads in detail.
C A U T I O N
Refer to
"Proper Handling Techniques"
on page 9 before connecting any probe
to the oscilloscope.
5