Maintenance - Husqvarna DURATIQ XP6 Operator's Manual

2. Push the headlight button to make the front and rear
headlights come on.
3. Push the headlight button again to set the front
headlights on.
4. Push the headlight button again to set the rear
headlight on.
Introduction
WARNING: Before you do maintenance, you
must read and understand the safety
chapter.
For all servicing and repair work on the product, special
training is necessary. We guarantee the availability of
professional repairs and servicing. If your dealer is not a
service agent, speak to them for information about the
nearest service agent.
Control box
The product has a control box. The control box has 2
rubber covers that can be removed to get access to the
fuses and the USB port for software updates. Behind the
left rubber cover is a 1 A fuse for battery charger and a
1268 - 002 - 25.05.2020
5. Push the headlight button again to set the front and
rear headlights off.
6. Look at the display to see if the front headlights (C)
and/or the rear headlight (D) are on.
C
15.6 h

Maintenance

20 A fuse for traction. Behind the right rubber cover is a
USB port for software updates (A).
A
D
100%
56%
50%
675 RPM
12.9 V
23