Maintenance - Husqvarna PG 830S Operator's Manual

5. Lock the weight to the weight holder with the lock
ring.
To adjust the weights
WARNING:
the weights. The moving parts can cause
injury.
Introduction
WARNING:
maintenance, you must read and
understand the safety chapter.
For all servicing and repair work on the product, special
training is necessary. We guarantee the availability of
professional repairs and servicing. If your dealer is not
a service agent, speak to them for information about the
nearest service agent.
For more detailed information, refer to .
To do before the maintenance
• Use personal protective equipment. Refer to
Personal protective equipment on page 6 .
• Use approved respiratory protection. The dust from
the product is dangerous to your health.

Maintenance

Do a check of the ON/OFF switch.
Do a check of the attachment points and the lock function for the handle.
1253 - 004 - 09.12.2022
Be careful when you adjust
Maintenance
Before you do
WARNING:
weight lock locks correctly when the weights
are put in the selected position.
1. Push in the weight lock (A) and move the weight to a
selected position (B) with the weight handle. Refer to
Weights on page 15 .
A
2. Release the weight lock to lock the weight in the
selected position.
• Park the product on a level surface.
• Stop the motor and disconnect the power plug to
prevent accidental start during maintenance.
• Clean the area around the product from oil and dirt.
Remove unwanted objects.
• Set out clear signs to give a warning to bystanders
that maintenance work is in progress.
• Keep fire extinguishers, medical supplies and an
emergency phone near.
Maintenance schedule
* = General maintenance done by the operator. The
instructions are not given in this operator's manual.
X = The instructions are given in this operator's manual.
O = The instructions are not given in this operator's
manual. Let an approved service agent do the
maintenance.
Daily
*
Always make sure that the
B
Each
Each 6
Weekly 12-36
months
months
*
17