Maintenance - Husqvarna BMG 555 P Operator's Manual

2. Rotate the propane tank valve clockwise to stop
the flow of the propane. Refer to
disconnect the propane tank on page 11 .
3. Turn the throttle control counterclockwise to stop the
engine.
4. Keep the tool plates against the surface until they
stop fully.
Introduction
WARNING:
maintenance, you must read and
understand the safety chapter.
For all servicing and repair work on the product, special
training is necessary. We guarantee the availability of
professional repairs and servicing. If your dealer is not
a service agent, speak to them for information about the
nearest service agent.
For more detailed information, refer to .
To do before the maintenance
• Use personal protective equipment. Refer to
Personal protective equipment on page 6 .
• Use approved respiratory protection. The dust from
the product is dangerous to your health.
General product maintenance
Clean the product.
Do a check of all safety devices.
Make sure that nuts and screws are tight.
Do a check of the brush sealing for damages and wear.
Clean the electrical enclosure.
Do a check of the electrical components, the cables and the
connections for wear and damages.
Do a check of the hose connections. Do a check of all hoses on
the product for damages or leakage.
Make sure that the dust hoses are not damaged and free of
blockage.
Make sure that the dust extractor is empty and connected cor-
rectly.
Do a check of the grinding discs for damages and wear.
Do a check of the emergency stop button.
Do a check of the brush strip.
14
To connect and

Maintenance

Before you do
5. Turn the ignition switch (B) counterclockwise.
6. Push the emergency stop button (C).
7. Remove the key of the operator presence control
from the product.
8. Stop the dust extractor.
• Park the product on a level surface.
• Stop the engine and disconnect the battery and
the propane tank to prevent accidental start during
maintenance.
• Clean the area around the product from oil and dirt.
Remove unwanted objects.
• Set out clear signs to give a warning to bystanders
that maintenance work is in progress.
• Keep fire extinguishers, medical supplies and an
emergency phone near.
Maintenance schedule
* = General maintenance done by the operator. The
instructions are not given in this operator's manual.
X = The instructions are given in this operator's manual.
O = The instructions are not given in this operator's
manual. Let an approved service agent do the
maintenance.
Daily
X
X
*
*
*
*
*
*
*
*
X
X
Each 3
Weekly
months
1991 - 001 - 02.06.2023