Husqvarna 243RJ Workshop Manual page 35

Centrifugal clutch
Assemble the clutch housing in the re-
verse order as set out for dismantling and
note the following:
– Rub the vibration damper with talc,
silicon or soapy water to facilitate as-
sembly.
– Make sure the AV element with notch
(A) aligns with the screw hole for the
locating screw.
– Position the circlip (B) in place. This
will facilitate subsequent assembly.
Push the whole unit into place and make
sure the circlip is positioned correctly in
the slot on the clutch housing.
4
33