Husqvarna 243RJ Workshop Manual page 29

Fuel system
6. Lift out the throttle control (D).
7. Lift off the starter throttle catch (E).
8. Disconnect both contact pins (F) from
the ignition switch (G).
9. Dismantle the ignition switch by prizing
it away using a knife or squeeze the
locking springs together whilst simulta-
neously pressing the contact out of the
throttle handle half.
Assemble the throttle handle in the
reverse order set out for dismantling.
NOTE!
Make sure the short-circuit cables
are not jammed.
3
27