Safety; Safety Definitions; General Safety Instructions; Special Safety Instructions - Husqvarna LC 551 iV Workshop Manual

Table of Contents

Advertisement

2.1 Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage to
the product, other materials or the adjacent area
if the instructions in the manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.

2.2 General safety instructions

WARNING: Read the warning instructions that
follow before you use the product.
The service center that repairs the product must have
safety devices that obey local regulations. Warnings and
cautions are used to point out specially important parts
of the workshop manual.

2.3 Special safety instructions

WARNING: Do not use accessories that are not
approved by the manufacturer. Do not do
changes that are not approved by the
manufacturer. This can cause injury or death to
the operator or other persons.
WARNING: Always use original spare parts and
accessories.
WARNING: Use approved hearing protection.
Noise from the product can result in permanent
hearing loss.
When you use compressed air, do not point the
airflow in the direction of your body. Air can go into
the blood circulation and kill you.
Use eye protection when you do work on springs
that have tension.
Use only a Husqvarna Battery Series type of battery
with this product. Obey the safety instructions that
are given for the battery and battery charger. For
more information, refer to the operator's manual for
the battery and the battery charger.
Warning symbols can be found on the product and
in this manual. Refer to
page 4 . If a warning symbol decal on the product

4 - Safety

2 Safety
Symbols on the product on
is damaged or missing, replace the warning symbol
decal.
To prevent accidental start during repairs and
maintenance, turn the safety key to 0, remove the
battery and wait at minimum 5 seconds.

2.4 Symbols on the product

Warning: Not careful or incorrect
use can result in injury or death for
the operator or others.
Please read the operator's manual
carefully and make sure that you
understand the instructions before
use.
Keep persons and animals at a
safe distance from the work area.
Look out for thrown objects and
ricochets.
Warning: Keep hands and feet
away from the rotating blade.
Warning: Keep hands and feet
away from rotating parts.
Remove the safety key before you
do repair work or maintenance.
IPX4 - Drip protected
Do not expose to rain
The product agrees with applicable
EC directives.
Noise emission to the environment
according to the European Community's
Directive. The product's emission is
specified in the Technical data chapter
and on the label.
1292 - 001 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents