Download  Print this page

Motor - Husqvarna LC 551 iV Workshop Manual

Hide thumbs


7. Remove the transmission support screws and the
supports. Remove the transmission and the rear
8. Remove the transmission from the rear axle.
9. Install the transmission in the opposite sequence.
Use the correct torque. Refer to
page 14 .
1292 - 001 -
Servicing tools on

6.9 Motor

6.9.1 To remove the power unit from the chassis
1. Remove the batteries from the power unit. Remove
the safety key, if it is installed.
2. Disconnect the cable from the control panel.
Repair instructions - 23



This manual is also suitable for:

Lb 548 i