Function Overview; Rating Plate And Product Serial Number; Motor; Battery - Husqvarna LC 551 iV Workshop Manual

5.1 Rating plate and product serial number

The product serial number is given on the rating plate.
Supply the model name and the article number when
you send an order for spare parts.
XXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXX
XXXXX XX XX
20XX
X XX
Use only with Husqvarna BLi batteries

5.2 Motor

The motor can hold 2 batteries.

5.3 Battery

WARNING: Before you use the battery, you
must read and understand the safety chapter.
You must also read and understand the
operator's manual for the battery and the battery
charger.
5.3.1 Battery status
The display shows the remaining battery capacity and if
there are problems with the battery. The battery capacity
is shown for 5 seconds after the product is switched off
or the battery indicator button is pressed. The warning
1292 - 001 -

5 Function overview

XXXXXXXXXXX
XXXX
XX
symbol on the battery is on when an error has occurred.
See # .
LED lights
All LEDs are lit
LED 1, LED 2, LED 3 are
lit
LED 1, LED 2 are lit
LED 1 is lit
LED 1 flashes
5.3.2 To charge the battery
Charge the battery before the first use. The battery is
only 30% charged when supplied to the customer.
Note: The battery charger must be connected to the
voltage and frequency specified on the rating plate.
The battery does not charge if the battery temperature is
above 50°C. The battery charger decreases the
temperature of the battery before it starts to charge.
1. Connect one end of the power cord for the battery
charger into the socket of the battery charger.
2. Connect the other end of the power cord for the
battery charger in an grounded mains socket. The
LED on the battery charger flashes green one time.
Battery status
Fully charged (75-100%)
The battery is 50%-75%
charged
The battery is 25%-50%
charged
The battery is 0%-25%
charged.
The battery is empty.
Charge the battery.
Function overview - 15