Safety - Husqvarna TC 112 Operator's Manual

Product damage
We are not responsible for damages to our product if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
General safety instructions
WARNING:
hands and feet and throw objects. Serious
injury or death may occur if you do not obey
the safety instructions.
WARNING:
product with damaged cutting equipment.
Damaged cutting equipment can throw
objects and cause serious injury or death.
Replace damaged blades immediately.
WARNING:
an electromagnetic field during operation.
This field may under some circumstances
interfere with active or passive medical
implants. To reduce the risk of serious or
fatal injury we recommend persons with
medical implants to consult their physician
and the medical implant manufacturer before
operating this product.
1903 - 004 - 18.12.2023
Used if there is a risk of
Used if there is a risk of
This product can cut off
Do not continue to use a
This product produces
• the product is not repaired at an approved service
center or by an approved authority.
Euro V Emissions
WARNING:
voids the EU type-approval of this product.

Safety

WARNING:
instructions that follow before you use the
product.
• Always be careful and use your common sense.
Avoid all situations which you consider to be beyond
your capability. If you feel uncertainty about the
operating procedures after you read the operator's
manual, consult an expert before you continue.
• Read and understand the operator's manual and the
instructions on the product carefully before you start
the product.
• Learn how to use the product and its controls safely
and learn how to stop the product quickly.
• Learn to recognize the safety decals.
• Keep the product clean to make sure that you can
clearly read signs and stickers.
• Clean fuel or oil spillage on the product before you
operate the product and before you put the product
in storage.
• Keep in mind that the operator will be held
responsible for accidents that involve other persons
or their property.
• Do not put hands or feet near parts that rotate.
• Do not put hands or feet below the product.
• Keep away from the discharge opening at all times.
• Always stop the blades when you operate the
product on gravel surfaces.
• Do not operate the cutting deck if the grass catcher,
discharge chute, or other safety devices are missing
or defective.
• Always disengage the blades when you do not mow.
• Make sure that grass or other unwanted materials
cannot touch hot exhaust or hot parts of the engine.
• Do not use the cutting deck to mow leaves or other
unwanted materials that can cause buildup.
• Do not transport passengers. The product must only
be used by one person.
Tampering with the engine
Read the warning
7