Husqvarna LC 551 iV Workshop Manual page 28

6.9.5 To remove the battery box
To remove the power unit from the chassis
1. Refer to
on page 23 , To remove the cover from the power
unit on page 25 and To remove the battery control
box on page 27 .
2. Remove the 4 screws and remove the battery box.
6.9.6 To remove the key switch
To remove the power unit from the chassis
1. Refer to
on page 23 , To remove the cover from the power
unit on page 25 and To remove the battery box on
page 28 .
2. Turn the battery box with the top down.
28 - Repair instructions
3. Remove the 3 screws and remove the bracket (A).
4. Remove the 7 screws. Remove the key switch (B). If
it is necessary, replace the key switch.
B
5. Remove the brackets (C) and (D) and the cables
that are attached to them. If it is necessary, replace
the brackets.
A
D
C
1292 - 001 -