Pulse Air Valve Intake Filter; Cleaning The Filter - Husqvarna Rider 18 ProFlex Workshop Manual

Reparation instructions

Pulse air valve intake filter

Cleaning the filter

• Loosen the rubber strap under the seat and lift
off the engine hood (Rider 18 ProFlex).
Tip the seat up, open the engine hood and tip it
forwards (Rider 20 ProFlex).
• Loosen the four quick-action clips and lift off the
cover and remove the filter.
• Blow out the filter using compressed air.
• Replace the filter in the cover and secure the
cover using the quick-action clips. Replace the
engine hood.
54
– English