Technical Data - Husqvarna 520iHT4 Workshop Manual

6.1 Technical data

Motor
Motor type
Weight
Weight without battery, kg
Weight with battery (Default battery ), kg
Cutting equipment
Type
Blade length, mm
Blade speed cuts/min in the SavE mode
Blade speed cuts/min not in the SavE mode
Water protection level
1
IPX4
2
Noise emissions
Sound power level, measured dB(A)
Sound power level, guaranteed L
Sound levels
Sound pressure level at the operator's ear, measured according to EN 60745-1 and EN
60745-2-15, dB(A)
3
Vibration levels
Vibration levels (a ) at handles refer to EN 60745-1 and EN 60745-2-15, m/s
h
rear handles
6.1.1 Approved batteries
Only use original batteries for this product.
6.1.2 Approved battery chargers
Battery charger
Input voltage, V
Frequency, Hz
Power, W
1
The Husqvarna Handheld Battery products marked with IPX4 fulfils these requirements on product approval lev-
el
2
Noise emissions in the environment measured as sound power (L
2000/14/EC. The difference between guaranteed and measured sound power is that guaranteed sound power
also includes dispersion in the measurement result and the variations between different products of the same
model refer to Directive 2000/14/EC.
3
Reported date for vibration level has a typical statistical dispersion (standard deviation) of 1,5 m/s
The declared vibration total value has been measured in accordance with a standard test method and may be
used for comparing on tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
30 - Technical data
6 Technical data
dB(A)
WA
520iHT4, 520iHE3
BLDC (brushless) 36 V
4.1
5.0
Double sided
550
3200
4000
Yes
94
96
84
2
Front/ 3.5/2.5
QC330 QC500
100-240 100-240
50-60 50-60
330 500
) in conformity with EC directive
WA
2
.
1235 - 001 -