7.3 To clean and examine the product parts
•
Clean and examine all parts fully. You find more
instructions in the chapter for each part if special
tools or procedures are necessary.
•
Replace damaged or defective parts.
•
Always use original spare parts.
7.4 Starter
7.4.1 To disassemble the starter
WARNING: Use protective glasses to prevent
injury to the eyes if the recoil spring ejects.
1. Remove the 4 screws and the cylinder cover.
2. Remove the 4 screws and the starter unit.
1239 - 001 -
3. Let the starter pulley rotate rearward until the spring
tension loosens.
4. Remove the screw (A).
A
B
C
5. Remove the starter pulley driver (B) and the spring
(C).
Repair instructions- 19