Husqvarna 543RBX Workshop Manual page 15

17
Item Description
1 Piston stop
2 Hex key
3 Torx T27
4 Piston assembly kit
5 Removal tool for 543RBX, 543RBK
6 Snap ring pliers
7 Pliers
8 Grease
9 Ignition tester
10 Pressure tester
11 Ignition cable pliers
12 Pin
13 Assembly fixture
14 Bearing removal tool
15 Pressure test plug
16 Rubber sheet (sealing plate)
17 Oil for the air filter
18 Cleaning agent
19 Removal tool for 553RBX
1239 - 001 -
18
Use to
Lock the piston.
Remove screws.
Remove and attach torx screws.
Assemble the piston.
Remove the starter pawl assembly.
Remove snap rings.
N/A.
Lubricate the parts in the angle gear.
Spark strength check.
Pressure test.
Repair the ignition cable.
Lock the angle gear.
Hold the product in position during
maintenance.
Remove the bearing from the crank-
case.
Pressure test.
Pressure test.
Clean the air filter.
Clean the product.
Remove the driver.
19
Article number
522 43 18-01
N/A
502 71 27-03
502 50 70-01
581 96 55-01
N/A
N/A
503 97 64-01
501 97 64-01
531 03 06-23
502 50 06-01
502 02 61-02
502 51 03-03
505 38 17-09
503 84 40-03
502 54 11-02
531 00 60-76
505 69 85-70
521 53 33-01
Servicing tools - 15