7. Remove the screw, the cable (D) and the cable (E)
from the ignition module.
8. If it is necessary, pull up the cables (D and E) from
behind the crankcase.
9. Remove the screw and remove the ignition module.
44 - Repair instructions
D
E
D
E
H
F
G
10. Remove the nut and remove the flywheel. Remove
the key from the crankshaft.
7.9.6 To examine the ignition system
1. Examine the clutch and the flywheel for wear or
damages. Replace the parts if it is necessary.
2. Examine the ignition module and its cables. Replace
the ignition module if it is damaged.
1239 - 001 -