Installing The Gateway; Emerson 1410S1 Installation Overview; Emerson Gateway 1410S2 Installation Overview - Emerson 1410S Reference Manual

Reference Manual
00809-0600-4410
3

Installing the Gateway

3.1

Emerson 1410S1 installation overview

This section describes how to properly mount the Gateway and make electrical
connections including wiring, grounding, and host system connections.
General considerations
The Gateway should be mounted in a location that allows convenient access to the host
system network (process control network) as well as the wireless field device network and
protects the Gateway from moisture and contamination. It is also best practice to install
the Emerson 781S Field Links centrally in the network for the most direct connections for
the Gateway.
Physical description
For dimensional drawing information, refer to Appendix A. The Emerson 1410S1 DIN-Rail
Mounted Gateway electronics are enclosed in a polymer housing. The top of the enclosure
has connections for serial communications. The bottom of the enclosure has connections
for power and Ethernet. The unit is designed to be mounted on a DIN rail inside an
electronic enclosure.
3.2 Emerson Gateway 1410S2 installation
overview
This section describes how to properly mount the Emerson 1410S2 Gateway and make
electrical connections including wiring, grounding, and host system connections.
General considerations
The Gateway may be mounted in any general-purpose location. Be sure the cover is
secured tightly to prevent exposure of any electronics to moisture and contamination.
The Gateway should be mounted in a location that allows convenient access to the host
system network (process control network). It is also best practice to install the Emerson
781S Smart Antennas centrally in the wireless network for the most direct connections to
the Gateway.
Physical description
For dimensional drawing information refer to Appendix A. The rugged modular
Emerson1410S2 Gateway electronics are enclosed in an aluminum housing. The conduit
entries in the enclosure have connections for power, Ethernet, serial and Emerson 781S
communications. The unit is designed to be modular and mountable to a pole or the
Cisco
Emerson 1410S/781S
®
IW6300 Access Point.
Installing the Gateway
May 2020
21