Emerson 1410S Reference Manual page 18

Configuration
May 2020
2. Select Specify an IP address (recommended).
3. Enter the following:
4. Select Save Changes.
5. When prompted, select Restart Apps.
6. Select Yes to confirm restart.
7. Close the web browser.
2.3.10 System backup
The Gateway has a System Backup and Restore feature that saves all user-configured data.
It is best practice that a System Backup be performed periodically throughout the
installation and configuration process. Starting with firmware version 4.7.53, a passphrase
is required when taking a backup. The passphrase is used to encrypt and decrypt the
backup. This will need to be done two times, for both theWirelessHART
networks.
Procedure
1. Navigate to System Settings → Gateway → Backup and Restore.
2. Enter a passphrase, confirm, and select Save Backup.
3. When the file download pop up appears, select Save.
4. Enter a save location and file name.
5. Select Save.
6. Select Return to form.
18
• Hostname
• Domain name
• IP Address
• Netmask
• Gateway
Note
Once the IP Address of the Gateway has been changed, communications to the web
interface will be lost. Restart the web browser, then log back into the Gateway using
the new IP address and other TCP/IP network settings. The PC/Laptop TCP/IP
network settings may need to be changed. During a restart, the wireless network
will be temporarily lost.
The Gateway collects the configuration date.
Note
System Backup contains user passwords and keys used for encrypting
communication. Store downloaded system backups in a secure location. The actual
files are also encrypted.
Reference Manual
00809-0600-4410
®
and ISA100
Emerson.com