Product Certifications - Emerson 1410S Reference Manual

March 2020
7

Product certifications

Rev: 2.0
7.1 European Directive Information
A copy of the EU Declaration of Conformity can be found at the end of the
Quick Start Guide. The most recent revision of the EU Declaration of
Conformity can be found at Emerson.com.
7.2 Telecommunications compliance
All wireless devices require certification to ensure they adhere to regulations
regarding the use of the RF spectrum. Nearly every country requires this type
of product certification. Emerson is working with governmental agencies
around the world to supply fully compliant products and remove the risk of
violating country directives or laws governing wireless device usage.
7.3 Europe
N1 ATEX Increased Safety with Intrinsically Safe Outputs to Zone 0
Certificate SGS20ATEX0036X
Markings
Standards EN IEC 60079-0: 2018, EN IEC 60079-7:2015+A1:2018, EN
N1 ATEX Increased Safety with Intrinsically Safe Outputs to Zone 0 (For
use only with the Cisco Outdoor Access Point Model IW-6300H-AC-x-K9)
Certificate SGS20ATEX0036X
Markings
Standards EN IEC 60079-0: 2018, EN IEC 60079-7:2015+A1:2018, EN
Special Conditions for Safe Use (X):
1. The enclosure's polyurethane paint finish may constitute an
electrostatic hazard. Care should be taken to protect it from external
conditions conducive to the build-up of electrostatic charge on such
surfaces. The equipment must only be cleaned with a damp cloth.
2. The equipment is not capable of withstanding the 500V electrical
strength test as defined in clause 6.1 of EN 60079-7:2015+ A1:2018
and 6.3.13 EN 60079-11:2012. This must be taken into account
during installation.
Quick Start Guide
II 3(1)G Ex ec [ia Ga] IIC T4 Gc (-40°C ≤ Ta ≤ +65°C)
60079-11: 2012, EN 60079-15:2010, EN 60079-31:2014
II 3(1)G Ex ec nA [ia Ga] IIC T4 Gc (-40°C ≤ Ta ≤ +65°C)
60079-11: 2012, EN 60079-15:2010, EN 60079-31:2014
Quick Start Guide
21