Wireless Field Devices: Wireless Device Does Not Appear On The Network; Wireless Field Devices: Wireless Device Appears In The Join Failure List; Wireless Field Devices: Wireless Device Appears With Service Denied - Emerson 1410S Reference Manual

Troubleshooting
May 2020
Possible cause: Session timeout
Recommended actions
6.10 Wireless field devices: Wireless device does not
appear on the network
Recommended actions
6.11 Wireless field devices: Wireless device appears
in the join failure list
Recommended actions
Re-enter the network ID and join key into the device.
6.12 Wireless field devices: Wireless device appears
with service denied
Possible cause: Update rate setting
Recommended actions
48
1. Verify whether current or historical information is being displayed (setting is
displayed at the bottom of each device configuration screen). Configuration
requires the Current setting.
2. Log back into AMS Wireless Configurator.
For security purposes, a configuration timeout is applied to sessions that have
been idle for more than 30 minutes.
1. Verify the device has power.
2. Verify the device is within effect communications range.
3. Verify the proper network ID has been entered into the device.
1. Verify the total number of devices on the network (25 maximum).
2. Go to SETUP → NETWORK → BANDWIDTH and click Analyze bandwidth.
Any changes will require the network to reform.
3. Reduce the update rate for the device.
Reference Manual
00809-0600-4410
Emerson.com